Chase Diamond

Tools International

Ltd

Electro Optics
All 2 axis lathes require that the radius of the diamond tool be consistent in terms of its radius throughout its specified cutting arc, in other words “Controlled Waviness”. This requires that the deviation from the ideal radius be controlled with greater precision. All our tools are available in both natural and synthetic single crystal diamond. We offer a range of geometries including radius size, rake angle and clearance angles. All diamonds are oriented to present the hardest part of the stone to the cutting radius. Tools are available in both solid shank and inserts. Cutting edges inspected to 800x magnification

Diamond Material

• Natural • Sumitomo • Monodie

Radius Range

• 0.01mm to 10.00mm

Controlled Waviness

• < 2.0 micrometre • < 1.0 micrometre • < 0.5 micrometre • < 0.25 micrometre • < 0.10 micrometre

Front Clearance type

• Cylindrical • Conical

Front Clearance Angle

• - 5 to -20 Degrees

Controlled Waviness Arc

• 90 Degrees • 100 Degrees • 110 Degrees • 120 Degrees

Top Rake Angle

• +2.5 to -25 Degrees

Form

• Solid Shank • Insert
Download a copy of our Electro Optics brochure (pdf).
Copyright Chase Diamond Tools International Ltd.
Electro Optics
All 2 axis lathes require that the radius of the diamond tool be consistent in terms of its radius throughout its specified cutting arc, in other words “Controlled Waviness”. This requires that the deviation from the ideal radius be controlled with greater precision. All our tools are available in both natural and synthetic single crystal diamond. We offer a range of geometries including radius size, rake angle and clearance angles. All diamonds are oriented to present the hardest part of the stone to the cutting radius. Tools are available in both solid shank and inserts. Cutting edges inspected to 800x magnification

Diamond Material

• Natural • Sumitomo • Monodie

Radius Range

• 0.01mm to 10.00mm

Controlled Waviness

• < 2.0 micrometre • < 1.0 micrometre • < 0.5 micrometre • < 0.25 micrometre • < 0.10 micrometre

Front Clearance type

• Cylindrical • Conical

Front Clearance Angle

• - 5 to -20 Degrees

Controlled Waviness Arc

• 90 Degrees • 100 Degrees • 110 Degrees • 120 Degrees

Top Rake Angle

• +2.5 to -25 Degrees

Form

• Solid Shank • Insert
Download a copy of our Electro Optics brochure (pdf).
Copyright Chase Diamond Tools International Ltd.

Chase Diamond

Tools International

Ltd